The Harsh Environment Research Facility will be a world leading facility that will enable clean energy research for harsh environment applications. Key infrastructure includes a climatic wind tunnel integrated with a wave basin which will provide for an extensive range of wind speed, temperature, precipitation and wave heights to be achieved within the facility. Innovative … Harsh Environment Research Facility
The Centre for Marine Simulation (CMS) possesses extensive capabilities to develop and deliver specialized marine simulation services. The CSM is unique in that it operates a wide variety of simulators, some of which are mounted on motion bases. Ballast Control and Cargo Handling Simulator The ballast control simulator was commissioned in 1994. This simulator is … Centre for Marine Simulation
Hyspex Mjolnor: Hyperspectral imaging sensor with short-wave infrared (SWIR) and very near infrared wave (VNIR) cameras to collect aerial images. Also has a LiDAR (Light Detection and Ranging) attachment to map the 3D surface. Comes with a tripod mount for non-aerial use. Astralite Edge: Combination topometric and bathymetric sensor used to create a 3D map … UAV Photogrammetry and Scanning Drones
Geoslam: Handheld mobile Simultaneous Localization and Mapping (SLAM) LiDAR (Light Detection and Ranging) unit used to create 3D maps of an area or structure, with a range of platforms and accessories. ExynAero: Autonomous (Level 4) Simultaneous Localization and Mapping (SLAM) LiDAR (Light Detection and Ranging) Uncrewed Aerial Vehicle (UAV) used for 3D mapping high-risk, GPS … Reality Capture Instruments
The Hyperspectral Scanning Unit (HSU) is a mobile laboratory that offers world-class, high-resolution hyperspectral imaging capabilities over most currently accessible EM spectral ranges, spanning the Visible Near Infrared (VNIR) to the Longwave Infrared (LWIR) regions. The primary focus of the HSU will be to investigate geological materials, but there are no restrictions on the type … Hyperspectral Scanning Unit (HSU)
For over 20 years, College of the North Atlantic’s (CNA) Office of Applied Research and Innovation has been a trusted innovation partner for the provision applied research services in Newfoundland and Labrador and across the country. Over the last four years, the College’s Centre for Reality Capture and Digitization Technology Access Centre has conducted over … Reality Capture and Digitization Technology Access Centre (RCD TAC)
Canada’s multi-purpose cold-ocean technology hub. The Launch, The Marine Institute’s state-of-the-art living lab bringing the world’s harshest cold-ocean environments to you. Run your ocean technology through research and development, testing, and demonstration in a rigorous cold-ocean environment to prove its real-world readiness.
LOOKNorth is a Canadian national Centre of Excellence for Commercialization and Research (CECR), founded and hosted by C-CORE. LOOKNorth networks Canadian remote sensing innovators and provides a bridge to commercial markets through a combination of remote sensing technology expertise, project management support, continuous engagement with end users to understand market needs, and business development support. … LOOKNorth, C-CORE
Since 1975 C-CORE has provided research-based advisory services and technology solutions to help clients mitigate operational risk in ice/iceberg-prone waters world-wide. With a special focus on understanding and managing ice risk, protecting vessels and infrastructure, and advancing design for frontier regions, C‐CORE leads the world in ice and ocean engineering. We add value to design … Facilities for Ice-related Research, C-CORE
C-CORE provides research-based advice and innovative solutions for the geotechnical aspects of infrastructure projects, both onshore and offshore. Market sectors served include oil & gas; pipeline; mining; Engineering, Procurement, Construction Management (EPCM) Contractors; and government. C-CORE’s geotechnical expertise, founded in physical and numerical modelling, includes pipeline testing, ice–seabed interaction, soil–structure interaction and reduced scale physical … Geotechnical Centrifuge Facility, C-CORE
The Earth Resources Research and Analysis (TERRA) Facility is housed in the Department of Earth Sciences. TERRA provides chemical and physical analyses utilizing a large variety of instrumentations, including ICP-MS, XRF, XRD, Microprobe, radiogenic isotope, and stable isotope mass spectrometers.
MAF specializes in high-resolution imaging and in-situ microbeam chemical analysis and age dating of minerals and other materials such as environmental and archaeological samples. The Facility has ongoing research and development projects on ore characterization for metallurgy and advanced mineral exploration but aims to support a wide range of research throughout the university and beyond. … Micro Analysis Facility (MAF) (CREAIT Lab)
C-CART provides research support, training and chemical analysis services, to undergraduate and graduate students, university researchers, government agencies and private sector R&D companies. The instruments associated with C-CART are grouped into four service areas: Nuclear Magnetic Resonance (NMR), X-Ray Crystallography (XRD), Mass Spectrometry (MS) and Materials Characterization (MC).
Memorial University is home to the Innovating Digital Energy Analytics (IDEAs) group. Our mission is to push the boundaries of digital analytics in the field of petroleum and energy, with a focus on cutting-edge technologies.
[email protected] Professor, Faculty of Engineering and Applied Science Research Interests: Remote sensing Ocean radar Machine learning
[email protected] Assistant Professor, Faculty of Engineering and Applied Science Research Interests: Numerical modeling Mechanical characterization Machine learning
[email protected] Assistant Professor, Faculty of Engineering and Applied Science Research Interests: Surface engineering Coating tribology Mechanical properties and characterization
Professor, Faculty of Engineering and Applied Science [email protected] Research Interests: Porous natural polysaccharide-based composites for the adsorptive removal of water pollutants Nanocarbon/metal oxide heterojunctions as visible-light-driven photocatalysts for environmental and energy applications Carbon quantum dots-based fluorescent sensors for the selective detection of water contaminants
Professor, Faculty of Engineering and Applied Science [email protected] Research Interests: Industrial automation with particular applications to natural resource industries Socio-economic impacts of automation Public review processes related to the impact of technology Intellectual property and innovation Robotics Machine vision Intelligent systems
Professor, Computer Engineering [email protected] Research Interests: Very-Large-Scale-Integration (VLSI) and Electronic Design Automation Micro-Electro-Mechanical Systems (MEMS) Design and Optimization Renewable Energy Harvesting Analog, Digital, and Mixed-Signal Circuit Design Microfluidics and Biosensors Instrumentation Wireless Sensor Networks
University Research Professor, Mechanical Engineering [email protected] Research Interests: Fluid Mechanics, Heat Transfer, Multiphase Flow Conduction and Convection Heat Transfer, Phase Change Electronics Cooling Marine Icing Internal Flows Heat Exchangers Modelling Transport Phenomena
Professor, Process Engineering Hibernia Research Group [email protected] Research Interests: Reservoir characterization and modelling of CO2 injection/storage Specialized core analysis (capillary pressure, relative permeability) CO2 – water relative permeability CO2 – water relative permeability in the presence of residual oil Wettability alteration due to CO2 – brine – mineral interactions CO2 – brine phase behaviour … Dr. Lesley James, P.Eng.
Professor, Process Engineering [email protected] Research Interests: Safety and risk analysis including hydrogen safety Control and optimization Real-time monitoring Alarm management Extraction of sulfur using ionic liquid Application of managed pressure drilling to geothermal drilling
Associate Professor, Process Engineering [email protected] Research Interests: Monitoring and alarm systems Process safety and risk assessment Reliability analysis Process modeling and control Machine learning for process safety